藏北高原夏季边界层加热(冷却)特征初探

利用GAME-Tibet1998年加强观测期安多探空观测资料与CAMP-Tibet2004年加强观测期那曲探空资料, 分析了藏北高原夏季大气边界层加热(冷却)特征. 结果表明: 夏季, 藏北高原大气边界层的大气加热(冷却)率的逐日变化特征明显, 晴天时较大, 多云和降雨时较小. 白天大气加热率和夜晚大气冷却率的平均值都基本相当, 印证了大气能量守恒.     

青藏高原西部赛利普中新世火山岩源区:地球化学及Sr-Nd同位素制约

青藏高原拉萨地块西部赛利普地区新生代火山岩依据主量元素可划分为超钾质、钾质和钙碱性系列,主要的岩石类型为粗面安山岩、粗面岩,一个超钾质岩石的40Ar-39Ar年龄为17.58Ma,指示出火山活动为中新世.超钾质、钾质和钙碱性火山岩都显示出富集LREE及LILE(Th、U)、亏损HFSE(Nb、Ta、Ti)的特征.超钾质火山岩具有较高的K2O(6.31%～8.55%)、MgO(6.75%～8.96%)、Cr(270.7×10-6～460.4×10-6)、Ni(142.3×10-6～233.9×10-6)含量,较高的(87Sr/86Sr)i(0.71883～0.72732)和较低的εNd(-14.78～-15.37),指示可能起源于一个前期亏损并经后期俯冲作用改造的富钾的方辉橄榄岩富集地幔源区.钾质火山岩具有比超钾质火山岩低的K2O、MgO、Cr、Ni含量以及高的Ba、Sr含量,初始87Sr/86Sr为0.71553～0.71628,初始143Nd/144Nd为0.51197～0.51198,在空间上与超钾质火山岩共生,可能是前者母岩浆的演化产物.钙碱性火山岩具有较高的Sr(881.7×10-6～1309.2×10-6)、Sr/Y比值(50～108)和较低的Y(12.05×10-6～18.02×10-6),明显亏损重稀土Yb(0.93×10-6～1.30×10-6),类似于典型的埃达克质岩成分特征但相对高钾,并具有相对低的(87Sr/86Sr);(0.70928～0.71374)以及高的εNd(-7.90～-10.91),指示起源于富钾增厚下地壳物质的部分熔融.区域上拉萨地块超钾质岩、钾质岩与N-S向地堑系在空间上共存、时间上相吻合,由此本文认为拉萨地块中新世钾质.超钾质岩和南北向地堑系的形成可能与中新世早期北向俯冲的印度大陆岩石圈断离有关.     

青藏高原东南木里地区二叠纪苦橄岩的Os-Sr-Nd同位素地球化学研究

本文报道了在青藏高原东南木里地区发现的二叠纪苦橄岩和与其共生玄武岩的主微量元素地球化学特征以及Os-Sr-Nd同位素组成。苦橄岩和与其共生玄武岩受地壳混染作用影响较小。根据苦橄岩的Ti/Y比值和初始的Os同位素组成,将木里苦橄岩分为两类:高Ti/Y型苦橄岩和低Ti/Y型苦橄岩,其中高Ti/Y型苦橄岩具有高的γ_(Os)= 5.3～ 10.7和ε_(Nd)= 5.9～ 6.4,与全球典型洋岛玄武岩的Os和Nd同位素组成接近,代表了地幔柱源区的同位素特征;而低Ti/Y型苦橄岩具有低的γ_(Os)=-4.1～ 1.2和ε_(Nd)= 3.2～ 5.0,可能表明受到了SCLM(大陆岩石圈地幔)源区物质的混染。与其共生的玄武岩具有低的γ_(Os)=-3.5～-1.6和ε_(Nd)=-0.6～ 0.7,表明其来自于不同于低Ti/Y型苦橄岩也有异于高Ti/Y型苦橄岩的地幔源区,但是也可能受到了SCLM物质的混染。基于Nd-Os同位素的地幔柱与SCLM的二端元混合模型显示:低Ti/Y型苦橄岩可能是SCLM物质组分与地幔柱起源的苦橄质原始岩浆混合形成的;与苦橄岩共生的玄武岩可能是由地幔柱来源的玄武质岩浆与SCLM小比例熔融的熔体混合形成的。     

冈底斯新近纪钾质火山作用:消减沉积物折返的地球化学与Sr-Nd-Pb同位素证据

在冈底斯岩浆岩带的羊八井地区,林子宗火山岩系上部出现小规模的粗面质火山岩.岩石学与地球化学研究表明粗面岩与时空密切相关的大体积安山质-英安质-流纹质火山岩属于不同的火山岩系:碱性钾质系列与钙碱性系列.详细的地球化学研究证明林子宗晚期小体积钾质岩具有独立的岩浆源区,而非早期钙碱性系统低压岩浆过程演化的产物.粗面质熔岩SiO2含量为62.91%～64.63%,具有高K2O(7.52%～8.05%)、Al2O3(16.64%-17.35%)、低TiO2(0.59%～0.68%)与MsO(0.15%～0.77%).钾质熔岩富集LILE与LREE,亏损HFSE,具有高Rb/Sr(1.1～2.3)、Th/La(0.59～0.80)、Th/U(6.3～10.9)和低Ce/Pb(4.1～6.2)与Ba/Th(4.3～14.5)比值,其同位素组成变化范围分别是87Sr/86Sr(I)=0.7068～0.7075、143Nd/144Nd(I)=0.51241～0.51252、206Pb/204Pb=18.87～18.95、207Pb/204Pb=15.63～15.70和208Pb/204Pb=39.24～39.68.粗面岩的地球化学与同位素特征表明冈底斯新近纪钾质火山岩来源于角闪岩相的消减沉积物熔融.因此,羊八井新近纪钾质火山熔岩提供了印度-亚洲大陆碰撞早期消减沉积物折返的证据.     

软硬互层金刚石复合片钻头在地浸砂岩型铀矿中的研究及应用

针对近年在巴音戈壁盆地及鄂尔多斯盆地钻探所遇到的复杂地质情况,研究试验了PDC钻头,在地浸砂岩铀矿钻探生产中取得了良好的效果,并制定总结了相应的钻进参数.     

河南省洛宁县寨凹钼矿床流体包裹体研究及矿床成因

寨凹钼矿床位于华北克拉通南缘的熊耳地体．矿床定位受马超营断裂带的次级断裂控制,矿体呈脉状贼存于太华超群石板沟组黑云角闪斜长片麻岩中。成矿过程包括3个阶段：石英-辉钼矿阶段（I）、石英-多金属硫化物阶段（Ⅱ）、石英-碳酸盐阶段（Ⅲ）,其中,I阶段为主成矿阶段。寨凹钼矿床可见2类流体包裹体,即水溶液型和含子晶包裹体;激光拉曼指示包裹体成分主要为H2O。从早到晚,流体包裹体均一温度从I阶段100～260℃,经Ⅱ阶段110～160℃．变化为Ⅲ阶段120—180℃．矿床总体属于低温热液矿床：流体包裹体盐度从I阶段的2～25wt％NaCl．eqv演化至Ⅱ阶段的6—30wt％NaCl．eqv．然后降为Ⅲ阶段的7～25wt％NaCl．eqv。I阶段均一温度范围宽广、流体包裹体盐度由双峰式演化为单峰式以及包裹体温度-盐度双变图的负相关性指示了流体混合是主要的成矿机制。寨凹钼矿流体包裹体以高密度、高盐度的低温低压流体为特征,是含CaCl,流体参与成矿的结果,热的岩浆流体与冷的含CaCl,的卤水的混合．导致了辉钼矿的沉淀。寨凹钼矿床地质和流体包裹体特征与侵入岩相关的成矿系统一致．指示其成因类型为与侵入岩有关的钼矿床．     

南海天然气水合物的形成和分布

从物理海洋、古气候、沉积环境和构造环境分析入手，研究了南海天然气水合物的形成条件。研究结果表明，在整个南海海域，天然气水合物生成的条件是存在差别的。南海，东北部，在氧同位素2、4、6期，由于菲律宾海的高盐度海水的注入，使这里的生物生产率特别高，陆坡上沉积了丰富的有机物质，加上此期间该处的沉积速率高，为天然气水合物的生成提供了物质条件；另外，自中新世末以来，由于菲律宾海板块与欧亚板块在台湾地区发生碰撞，对南海北部产生北西向挤压，加快了流体在沉积物中的活动，为天然气水合物的生成提供了良好的构造环境。因此认为南海东北部陆坡应是南海天然气水合物最丰富的地区。     

Action of Cnoidal Waves on Vertical Walls

Based on the 2nd order cnoidal wave theory, the characters of shallow water standing waves and their action on vertical walls are studied in this paper. The theoretical expressions of the wave surface elevation in front of and the wave pressure on the vertical wall are obtained. In order to verify the theoretical results, model tests were made in the State Key Laboratory of Coastal and Offshore Engineering at DUT. For the wave surface elevation in front of the wall and the wave forces on the wall at the moment when the wave surface at the wall surface goes down to the bottom of the wave trough, the calculated results coincide quite well with the experimental results. For the wave forces on the wall at the moment when the wave surface at the wall surface goes up to the top of the wave crest, the theoretical expressions are modified by the experimental results. For the convenience of practical use, calculations are made for the wave conditions which usually occur in enginering practice by use of the inves     

A New Approach to High-Order Boussinesq-Type Equations with Ambient Currents

A new approach to high-order Boussinesq-type equations with ambient currents is presented. The current velocity is assumed to be uniform over depth and of the same magnitude as the shallow water wave celerity. The wave velocity field is expressed in terms of the horizontal and vertical wave velocity components at an arbitrary water depth level. Linear operators are introduced to improve the accuracy of the kinematic condition at the sea bottom. The dynamic and kinematic conditions at the free surface are expressed in terms of wave velocity variables defined directly on the free surface. The new equations provide high accuracy of linear properties as well as nonlinear properties from shallow to deep water, and extend the applicable range of relative water depth in the case of opposing currents.     

Wave Loads and Protective Techniques of An On-Shore Wave Power Device

In this paper, the extreme wave loads on an on-shore wave power device are investigated. First, boundary element method is applied to solve the three dimensional potential problem based on the small amplitude wave assumption. Then the motion of the Oscillating Water Column (OWC) inside the device and its laods on the device are calculated in time domain. Several protective techniques often applied are simulated by changing the constraint of the upper end of the chamber of the device. Numerical results are used to judge the effectiveness of these techniques. The investigation shows that damping can not effectively restrain the motion of OWC when the period of incident wave is long, which may cause dangerous loads on the structure. The shut chamber can effectively restrain the motion of OWC, but alternatively cause high pressure in the chamber. A Contracting opening with a Taper (CT) can exhaust a great amount of kinetic energy of OWC, and significantly decrease the loads. It is a promising protective tec